Unifiller
Telefone
(44) 3266-1556
E-mail
Atendimento
Perguntas Frequentes
How often should I disassemble and clean my hand held nozzle?
The hand held nozzle (hhn) should be disassembled, cleaned and sanitized after every use. Please follow these instructions.

1.Take the hhn apart, following the instructions in the manual provided.

2.Remove all o rings – clean and inspect for wear and tear (replace if you see flat spots, nicks or tears)

3.Clean all parts that contact food/product – use brush provided to clean out the product hose.

4.Put orings back on parts and lubricate using Haynes Lubrifilm Plus

5.Reassemble
What size of air compressor should I use for my machine?
 The hand held nozzle (hhn) should be disassembled, cleaned and sanitized after every use. Please follow these instructions.

The compressor should be capable of 5-7 CFM @100 PSI. A 5-horsepower compressor is the ideal size and will last many years. We recommended that the compressed air supplied to the depositor be run through an air drying system, as this will increase the service life of the pneumatic components.
What air pressure should I be using when operating the machine?
Optimum performance is achieved by setting the air pressure gauge on the machine to 80 PSI at rest and at least 70 PSI while cycling.
How often do I need to change my O-rings?
 O-rings should be changed when you start to see fluctuations in your deposit sizes, or if there are any cuts, nicks, or flat spots on the ring. Some customers change their O-rings every day while others change them every week or two depending on the type of product they are using.
What type of lubricant should I use on my O-rings
 Unifiller supplies each new machine with a tube of Lubri-Film Plus. We recommend using this lubricant as it has a USDA rating of H-1. The lubricant is sanitary, non-toxic, odorless and tasteless.
Unifiller do Brasil - Fone: 55+(44) 3266-1556
Av. Pioneiro Maurício Mariani, 908 - CEP: 87.065-510 - Jd Itaipu - Maringá - Paraná - Brasil
Unifiller
UDS